Bob and all,
Lyle Johnson (the DSP designer) has stated several times that actual ALC
begins at the 5th bar on the "ALC" meter. That is the point of "Zero
ALC" for the K3/K3S/KX3/KX2.
The K2 is different in its indication in that the ALC begins at the 1st
bar illuminated. The data mode setup for the K2 is the same - set the
audio level correctly and control the power with the power knob.
So for the K2, you advance the audio until you begin the see the 1st ALC
bar illuminated and then back off until it goes out.
73,
Don W3FPR
On 9/8/2017 2:41 PM, Bob McGraw K4TAX wrote:
Don is absolutely correct on his earlier points. The K3S setup and
operation does not follow the suggestions for setting the audio levels
as other radios and as described in the WSJT-X user information.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
