Nah, I read it wrong. Bob, K4TAX
Sent from my iPhone > On Nov 2, 2017, at 1:25 PM, Gordon LaPoint <gordon.lapo...@gmail.com> wrote: > > I must be missing something here. I don't see where the original poster had > anything to do with a tuner between the K3 and the KPA1500. He wanted to > hook his P3 TX monitor input to the output of the KPA1500 amp, before the amp > tuner. Or maybe I misunderstood the original post. > Gordon - N1MGO > >> On 11/02/2017 02:20 PM, Bob McGraw K4TAX wrote: >> Most authorities I read and follow strongly suggest one NOT use a tuner >> between the radio and the amp. >> >> This "old wives tail" goes back to the time many to most early tube type >> grounded grid amps did not have a tuned input. Seems that hams today choose >> to believe and practice old and outdated methodology {largely because >> someone said so} as opposed to learning and using current and correct >> methods. >> >> 73 >> >> Bob, K4TAX >> >> >> >>> On 11/2/2017 1:14 PM, RIchard Williams via Elecraft wrote: >>> James, >>> Am not sure why you need a tuner between the radio and the amp in the first >>> place?? As of now, I have my K3S or K3 driving a Alpha 9500. I never have >>> used the tuner in either when driving the amp? I assume the KPA9500 will >>> have a 52 ohm input, and you would not need a tuner. >>> Dick, K8ZTT >>> >>> From: James Wilson <w4rk...@gmail.com> >>> To: Elecraft <elecraft@mailman.qth.net> >>> Sent: Thursday, November 2, 2017 11:54 AM >>> Subject: [Elecraft] KPA1500 with P3 Transmit Monitor >>> Looking at a draft of the KPA1500 amplifier, it appears >>> that the only place to install a TxMon or Wattmeter coupler >>> is at the - output - of the built-in tuner. >>> >>> At that point, it will always show the SWR of the >>> coax feedline, not the SWR that the amplifier "sees" as >>> adjusted by the built-in tuner. >>> >>> Or, is there a coupler built-in inside the KPA1500 ? >>> >>> What am I missing? >>> >>> Jim - W4RKS >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to richarddw1...@yahoo.com >>> >>> >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to rmcg...@blomand.net >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to gordon.lapo...@gmail.com > > > -- > Gordon - N1MGO > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to rmcg...@blomand.net > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com