Hi, In wsjt turn off Dtr or RTS PTT and set Cat commands for this. In the K3 turn the menu entry Keying to Off Off. Make sure all your other software uses software Ptt and you arr are all set.. 73 Tom
Sent from my Samsung Galaxy smartphone. -------- Original message --------From: Gary Smith <g...@ka1j.com> Date: 2017-11-13 2:12 PM (GMT-05:00) To: Elecraft@mailman.qth.net Subject: [Elecraft] WSJT-X K3/K3s hanging as Tx For those using WSJT-X, sometimes I find the K3s is locked as transmit but there is no RF being sent and no Rx from the K3. Looking at the P3 I see a jitter on the upper half of the screen as if there was a tiny output but no Rf is seen on any of the three SWR meters in line (K3s, AP3 & LP-100A). I couldn't get WSJT to receive, looked at the settings, all were correct and as is sometimes needed with WSJT-X, I rebooted to get it to work properly but it still did not lock onto the K3s frequency. Rebooted again and then I realized the K3s was in that TX condition with both the red & yellow LEDs lit and that jitter on the P3 upper screen. This happens every so often and what I have to do is touch any of the buttons on the K3s and it disengages this situation. I did that to deal with the issue I mentioned above. I could restart the K3s but then I'd have to restart LP-Bridge and wait, so I use the quick fix. Anyone experience this and figure out how to prevent it? Thanks! 73, Gary KA1J ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to tom...@videotron.ca ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
