I second Carl's explanation. I run WSJT-X on my K3s in rig split mode exclusively. It works transparently and flawlessly.
On Mon, Dec 4, 2017 at 5:02 PM, Carl Clawson <clawso...@gmail.com> wrote: > Hi Dany. This scared me a little bit too until I figured out what it was > for. > > This is not just for expeditions. It's for everyone to use whose rig can > handle it. > > Your TX frequency will still be as indicated on the FT8 screen. The > software will raise the audio tone frequency by the same amount that it > drops your VFO B so that your tone is in the right place. By doing this, > the audio tone frequency is kept high enough that its harmonics will be out > of your FT8 passband. This is good -- it helps keep the band clean. > > See section 4.2 in the wsjt-x user guide. > > 73, Carl WS7L > > > On Mon, Dec 4, 2017 at 3:59 PM, Dany VE2EBK <ve2...@hotmail.com> wrote: > > > Hi > > > > I would like to know if someone tried to run WSJT-X FT-8 in Split mode, > > not Split in the audio band but in real Split by activating the option in > > the radio tab of the configuration? > > > > Here, when I activate Split option, K3 change for Split, RX stay on VFO > A, > > TX change to VFO B but TX frequency drop of 1 kHZ ! If I turn the VFO B > > (TX) 3 kHz up for example, the VFO B return 1 KHz down when a > transmission > > start (TUNE is enough). > > > > This option seems to have been for the DX station rather than for use. > > > > It would be nice to check this before the 3Y0Z DXpedition that during > ... > > > > 73 > > > > Dany VE2EBK > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to clawso...@gmail.com > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to c...@murgatroid.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
