Mark, Can you be specific about how you are determining that the BFOs are on the wrong side of the carrier?
Using 40 meters, tune in a signal, then tune the pitch of the signal to a lower tone, observing which way you turn the VFO dial - if you have LSB or CW selected, the pitch should become lower as you tune lower in frequency - USB and CWr will be the reverse. If you indeed do have inverted sidebands, then re-check the BFO range test and let us know what the high and low BFO frequencies are. and let us know the number (x.x) that was marked on the envelope your crystals were packaged in. Also, do you have the KSB2 installed yet or not? 73, Don W3FPR > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Mark Bayern > Sent: Thursday, May 04, 2006 2:58 PM > To: Darwin, Keith > Cc: elecraft@mailman.qth.net > Subject: Re: [Elecraft] K2 Part II Alignment Probs > > > On 5/4/06, Darwin, Keith <[EMAIL PROTECTED]> wrote: > > Like you, I used the settings from the manual for CAL FIL and they > > worked OK. Several weeks after completing the rig I went back and > > optimized them with Spectrogram. > > Not quite -- when I use the manual's values I'm on the wrong side of > the passband. > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date: 5/3/2006 > > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com