Ok---this might be elementary to many but I can't seem to find the problem. After I built the NB board and plugged it in along with the SSB board and plugged in the ATU cable and the internal battery cable, I plugged in the speaker cable, Now there is no audio from the speaker, but there is audio from the headphones. I checked the speaker and cable with a ohmmeter and things look ok. Elecraft suggusted that the headphone jack might be bad, but I had never used it before this and the audio was ok from the speaker then. Everything else is working fine including the NB Has anyone else experienced this problem? I might add that I did not build this K2 but aquired it total built and working 100% Any help would be appreciated.
Ken K1DWZ _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com