Not two tall feet on the front of both boxes and two short feet on the rears?

Chuck Jack 
KE9UW

Sent from my iPhone, cjack 

> On Jun 28, 2018, at 12:15 PM, Michael Blake <k9...@mac.com> wrote:
> 
> A perfect solution is at hand.  I had two left over rear rubber feet from a 
> KPA500 replacement bottom cover kit and I found that they will mount using 
> existing screw locations on the bottom of the KAT500.  Using these feet makes 
> the KAT500 match perfectly with the height of the SP3 that it is next to.
> 
> I have an email off to Elecraft parts to try and buy two more of these feet 
> so that everything matches…… as it should…… I think :)
> 
> Michael Blake
> k9...@mac.com <mailto:k9...@icloud.com>
> 
> 
> 
> 
> 
> 
>> On Jun 27, 2018, at 3:04 PM, Michael Blake <k9...@mac.com> wrote:
>> 
>> I received and completed my KAT500k this morning and I must say it is quite 
>> a tuner.  Very nice indeed. Very capable.
>> 
>> As I integrated it into my K-Line station (K3s, P3 with TX Mon, SP3, KAT500) 
>> I immediately noticed that the KAT500 does not have the same height feet on 
>> it as any other cabinet in the K-Line.  Whatever it is placed next to it 
>> sits a bit over 1/8” lower.
>> 
>> I realize that it probably does match the W2 wattmeter but with four other 
>> SWR measuring devices (K3s, P3/TX Mon, KPA500, KAT500) I really didn’t plan 
>> to buy one of those just to even up the cabinets :).
>> 
>> So for us OCD folks maybe it would be possible to include both height feet 
>> in the kit so that it could match the rest of the product line when desired.
>> 
>> If you take a look at my picture on QRZ.com <http://qrz.com/> you can 
>> clearly see how it throws everything out of balance :)
>> 
>> Very 73 - Mike - K9JRI
>> 
>> 
>> 
>> 
>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to c-haw...@illinois.edu
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to