Do you have the config menu on your K3s item SPKR+PH set to YES or NO? When I set that config item to YES then the audio to the right headphone is muted and the speaker works. With NO selected I have audio to both headphones and the speaker is muted.
I have this config setting set to M1 so that I can switch between speaker and headphones quickly. If I am listening to speaker and want to go to headphones there is always audio to the left phone and quick touch of M! mutes the speaker and gives audio to both phones. 73, Dick WM6G On Tue, Jul 24, 2018 at 1:36 PM, Don Wilhelm <donw...@embarqmail.com> wrote: > Clay, > > > On your K3S, did you try plugging into the rear phones jack? You can do > that without any 1/8 inch to 1/4 inch adapter. > > The resistance of each earpiece should be easy to check with your ohmmeter > and be revealing if there is a cord problem. The left channel (tip) should > compare with the right (ring) unless something is open or shorted. > > 73, > Don W3FPR > > On 7/24/2018 4:23 PM, Clay Autery wrote: > >> Anyone ever had a ProSet two fail to deliver two channel output when >> everything is set up correctly (aka bad cable or failed R channel solder >> joint at one end or the other)? >> >> My Elmer has a set bought in April of this year and has never been able >> to get right channel. I took it today to try on my K3s with known good >> setup for 2-channel into phones (Sennheiser HD598SE). >> >> Same problem on my radio... no right channel. Almost HAS to be 1) >> solder joint failure on one of the wires to the driver, 2) a right channel >> (+) solder failure at the 1/8" TRS, 2) failed right driver. It's a >> non-coiled three cable-bonded cord... so I am assuming 3 conductors with >> shields for ground. >> >> ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to dickwade...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
