Anyone ever had a ProSet two fail to deliver two channel output when
everything is set up correctly (aka bad cable or failed R channel solder
joint at one end or the other)?
My Elmer has a set bought in April of this year and has never been able
to get right channel. I took it today to try on my K3s with known good
setup for 2-channel into phones (Sennheiser HD598SE).
Same problem on my radio... no right channel. Almost HAS to be 1)
solder joint failure on one of the wires to the driver, 2) a right
channel (+) solder failure at the 1/8" TRS, 2) failed right driver.
It's a non-coiled three cable-bonded cord... so I am assuming 3
conductors with shields for ground.
He's ordered a new cable, but I want to make sure it's not something we
have both not considered before replacing the cable. I guess he could
warranty repair, et al. but he doesn't want to be without a functional
headset for weeks.
73,
--
______________________
Clay Autery, KY5G
(318) 518-1389
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
