Fun part is mounting the P3 to the K3. Both side panels screw on from side. No way to share a common panel.
Sent from my iPhone ...nr4c. bill > On Sep 21, 2018, at 7:49 PM, Bob McGraw K4TAX <rmcg...@blomand.net> wrote: > > I believe if one removes the feet from the right side of the K3S and the > handle from the left side, all will work just fine. No modifications or > panels needed. > > Mine are sitting side-by-side and with feet and handle in place on my K3S, P3 > is to the left of the radio, overall width is 17.625". Some of the rack > shelf units I researched show 17" inside dimensions for equipment. I did > find one that was 17.750". These are fixed shelves and not slide out > shelves. > > Check RackMountMart.com > > 73 > > Bob, K4TAX > > > >> On 9/21/2018 5:17 PM, Clay Autery wrote: >> Thanks... Looks like the solution is to get a spare K3s right side panel >> and sib-machine it in a way that it can serve as a common panel for both >> components.... >> 73,Clay, KY5G >> >> >> Sent from my Verizon, Samsung Galaxy smartphone >> -------- Original message --------From: Bob McGraw K4TAX >> <rmcg...@blomand.net> Date: 9/21/18 16:45 (GMT-06:00) To: >> elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 : Rack Mount Option? >> Based on published numbers, the P3 is 6.1" wide, the K3S is 10.7" >> wide. As I recall a 19" rack shelf is 16.75". If all is correct, a >> real tight fit, I'd say. >> >> 73 >> >> Bob, K4TAX >> >> >>> On 9/21/2018 4:36 PM, Clay Autery wrote: >>> I haven't measured lately... Is a K3/P3 width too wide for a single 19" 3U >>> rack unit? >>> >>> >>> Sent from my Verizon, Samsung Galaxy smartphone >>> -------- Original message --------From: Jim Rhodes <jimk...@gmail.com> >>> Date: 9/21/18 11:34 (GMT-06:00) To: "Petr, OK1RP/M0SIS" >>> <indi...@xsmail.com> Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] >>> K3 : Rack Mount Option? >>> Novexcomm.com is all that I have seen. Looks like good stuff, but I haven't >>> ordered yet. >>> >>> >>> Jim Rhodes >>> K0XU >>> >>>> On Fri, Sep 21, 2018, 10:02 Petr, OK1RP/M0SIS <indi...@xsmail.com> wrote: >>>> >>>> Hi, >>>> >>>> anything changed from 2007 already? :) >>>> >>>> I am looking for 19' rack mount option for KPA500, KAT500, W2 as same as >>>> PSU >>>> and antennas multi-switch etc... >>>> >>>> Thanks for info. >>>> >>>> >>>> >>>> >>>> >>>> ----- >>>> 73 - Petr, OK1RP >>>> "Apple & Elecraft freak" >>>> B:http://ok1rp.blogspot.com >>>> G+:http://goo.gl/w3u2s9 >>>> G+: http://goo.gl/gP99xq >>>> -- >>>> Sent from: http://elecraft.365791.n2.nabble.com/ >>>> ____________________I believe if one removes the feet from the right side >>>> of the K3S and the > handle from the left side, all will work just fine. No modifications or > panels needed. > > Mine are sitting side-by-side and with feet and handle in place on my K3S, P3 > is to the left of the radio, overall width is 17.625". Some of the rack > shelf units I researched show 17" inside dimensions for equipment. I did > find one that was 17.750". These are fixed shelves and not slide out > shelves. > > Check RackMountMart.com > > 73 > > Bob, K4TAX > > > >> On 9/21/2018 5:17 PM, Clay Autery wrote: >> Thanks... Looks like the solution is to get a spare K3s right side panel >> and sib-machine it in a way that it can serve as a common panel for both >> components.... >> 73,Clay, KY5G >> >> >> Sent from my Verizon, Samsung Galaxy smartphone >> -------- Original message --------From: Bob McGraw K4TAX >> <rmcg...@blomand.net> Date: 9/21/18 16:45 (GMT-06:00) To: >> elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 : Rack Mount Option? >> Based on published numbers, the P3 is 6.1" wide, the K3S is 10.7" >> wide. As I recall a 19" rack shelf is 16.75". If all is correct, a >> real tight fit, I'd say. >> >> 73 >> >> Bob, K4TAX >> >> >>> On 9/21/2018 4:36 PM, Clay Autery wrote: >>> I haven't measured lately... Is a K3/P3 width too wide for a single 19" 3U >>> rack unit? >>> >>> >>> Sent from my Verizon, Samsung Galaxy smartphone >>> -------- Original message --------From: Jim Rhodes <jimk...@gmail.com> >>> Date: 9/21/18 11:34 (GMT-06:00) To: "Petr, OK1RP/M0SIS" >>> <indi...@xsmail.com> Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] >>> K3 : Rack Mount Option? >>> Novexcomm.com is all that I have seen. Looks like good stuff, but I haven't >>> ordered yet. >>> >>> >>> Jim Rhodes >>> K0XU >>> >>>> On Fri, Sep 21, 2018, 10:02 Petr, OK1RP/M0SIS <indi...@xsmail.com> wrote: >>>> >>>> Hi, >>>> >>>> anything changed from 2007 already? :) >>>> >>>> I am looking for 19' rack mount option for KPA500, KAT500, W2 as same as >>>> PSU >>>> and antennas multi-switch etc... >>>> >>>> Thanks for info. >>>> >>>> >>>> >>>> >>>> >>>> ----- >>>> 73 - Petr, OK1RP >>>> "Apple & Elecraft freak" >>>> B:http://ok1rp.blogspot.com >>>> G+:http://goo.gl/w3u2s9 >>>> G+: http://goo.gl/gP99xq >>>> -- >>>> Sent from: http://elecraft.365791.n2.nabble.com/ >>>> ______________________________________________________________ >>>> Elecraft mailing list >>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>> Help: http://mailman.qth.net/mmfaq.htm >>>> Post: mailto:Elecraft@mailman.qth.net >>>> >>>> This list hosted by: http://www.qsl.net >>>> Please help support this email list: http://www.qsl.net/donate.html >>>> Message delivered to jimk...@gmail.com >>>> >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to k...@montac.com >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to rmcg...@blomand.net >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to k...@montac.com >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to rmcg...@blomand.net > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
