Was just brainstorming...  Maybe as I posted subsequently, you could just bond 
the two units togetger with additional hardware....
Thermal issues could be dealt with by creating an efficient thermal interface 
bewtween the units and adding a fan to the P3 to take the heat out....  the P3 
mass could actually sink MORE heat than just the flat panel....
I don't mind actually engineering a dedicated solution...
I'm not contemplating a 19" rack right now, but its not out of the question in 
the future...


Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: "Joe Subich, W4TV" <li...@subich.com> 
Date: 9/21/18  18:56  (GMT-06:00) To: elecraft@mailman.qth.net Subject: Re: 
[Elecraft] K3 : Rack Mount Option? 




On 2018-09-21 6:17 PM, Clay Autery wrote:
> Thanks...  Looks like the solution is to get a spare K3s right side 
> panel and sib-machine it in a way that it can serve as a common
> panel for both components....
Not likely since the right panel of the K3/K3S and the left panel of
the P3 are both mounted with 3D connectors and screws passing from
the outside of the panel.  In addition, the K3/K3S has regulators
which use the right panel as a heat sink and capturing that inside
the P3 would impact the cooling ability.

73,

    ... Joe, W4TV


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@montac.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to