I think it is called TX DELAY. I know the setting is in there.
-John NI0K
John Stengrevics wrote on 9/23/2018 10:29 AM:
Hi Don,
That was timely as I just got off Skype with Jim, W6PQL. He mentioned that the
ALC should be held high for some milliseconds to allow for the amp’s relays to
switch over thereby protecting the LNA.
Since the K3S works differently than most, he suggested that I look for an RF
Hold-Off setting on the K3S and set it for around 50 milliseconds. That being
said, I don’t see that in the manual or in Fred’s book. Any suggestions?
73,
John
WA1EAZ
On Sep 23, 2018, at 11:12 AM, Don Wilhelm <donw...@embarqmail.com> wrote:
John,
I do not understand how the amplifier or the ALC could protect the LNA.
I assume the LNA is only used on receive, so if you have good sequencing
between receive and transmit, no damage could occur.
ALC is only applicable to transmit, and Elecraft does not recommend using ALC
to limit the drive to the amplifier. Set the power to the amp properly and all
will be well.
Using ALC to control the exciter power is a bad way to do things, it will only
lead to distortion and spurious emissions from the amplifier.
73,
Don W3FPR
On 9/23/2018 10:58 AM, John Stengrevics wrote:
My apologies - I should have added that I am using a Downeast Microwave DTR
relay to take the LNA out of the line when voltage applied to the relay drops
as a result of transmission.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jasimm...@pinewooddata.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com