On Fri, Nov 2, 2018 at 10:10 AM Don Wilhelm <donw...@embarqmail.com> wrote:
> The wiring for the Icom AH4 Interface is detailed on page 8 of the > KAT500 manual. Pin 4 of the Molex connector is connected to the shield > (shell) of the T-R-S plug. > > I don't know how the MFJ cable is wired. > > BTW - there are no hyphens in Elecraft product designations, so it is > the "KAT500" and not the "KAT-500". > > 73, > Don W3FPR > You are correct sir. The MFJ cable is wired exactly as the table in the KAT500 manual. And mea culpa on the dash in the desiginator. I won't do that again. Thank you, p.s. I ordered my KAT500 this morning. The next item on my "gonna get" list is the KPA500. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com