Kevin,
You are unlikely to hear anything from the headphones from that jack.
Feed it into a soundcard and you should see something using a panadapter
application like HDSDR or NaP3.
The RX I/Q output is low level and broadband. It is not suitable for
digital mode software like FlDigi. For that software, use the Phones jack.
73,
Don W3FPR
On 1/10/2019 12:24 AM, Kevin F. wrote:
I did check that the RX I/Q was enabled and still hear nothing, on my
computer, when plugged in to the RX I/Q port. I'm ordering a set of adapters
so that I can put my headphones on the radio directly to see what I hear
then. Thanks all for trying to help...
I still wonder if I should hear anything with the RX I/Q enabled or not, it
would be great if someone could answer that question.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
