After working a friend on 10 meters with FT8 I phoned and asked him why he always stayed up high at 2454 Hz. He said WSJT-X said he was dead on 2500 Hz.
I asked him what it said my frequency was. He said it was 1048 Hz; my WSJT-X said I was dead on 1000 Hz. We did more testing at other frequencies and on other bands and found similar discrepancies. We involved a third station and compared three ways. The results were the same: no agreement anywhere. The radios were my K3s, a TS-990s, and a high-end Yaesu. All of us were using WSJT-X 2.0.0. None of us had RIT or XIT in use. What’s the deal? Is there a way to calibrate the software so the frequency shown by WSJT-X is the frequency upon which we are actually transmitting or receiving? Please keep in mind that none of us is a Paul Horowitz, but neither are we Gomer Pyle… somewhere in between. Cheers. Richard - W4KBX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com