The mics work. My problem was a burst of noise when the rig went into
transmit.
It appears re-seating the USB cable in the back of the radio has cured
the problem. It did not appear to be lose. And the noise would appear
even if I was using the VOX or PTT switch or the internal DVR. In other
words, not using the USB to trigger the radio.
There's one to put in the books. I am sure I won't be the only person
to run into this and I still can't explain it.
k4ia, Buck
K3# 101
Honor Roll 8B DXCC
EasyWayHamBooks.com
On 3/17/2019 12:22 PM, Don Wilhelm wrote:
Buck,
It sounds like that noise is coming from whatever computer software
application you are using. You mentioned N1MM.
When you unplug the USB cable, whatever software you are using loses
communications with the radio.
When you plug it back in, that program is not attempting to re-establish
communications.
What applications do you have active on your computer?
I again suggest you get the microphone to work first - unplug everything
from the K3 except the microphone, the power and the antenna
connection. There may be something unrelated to the microphone going
awry, so eliminate everything except the microphone. When that works,
build things back up one at a time until you discover the culprit.
73,
Don W3FPR
On 3/16/2019 7:13 PM, Buck wrote:
I've tried all the combination of mics and mic bias. The noise
happens even with the mic gain turned all the way down and the rig in
TEST mode. It happens when N1MM is not running. It happens using the
internal DVR card. It happens with the mic disconnected and using the
XMIT button on the front of the radio.
-
Here is a clue. If I turn on the VOX and reduce the either the RF or
AF gain on the receiver, I start getting the noise about once every
half second. It sounds like it starts with a "ping." Sounds like
something is polling the radio.
If I disconnect the USB cable on the back of the radio, no noise. It
seemed to be properly seated. Now, if I plug the USB cable back into
the radio, no noise. Have I found the culprit? A lose USB cable?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html