Does using Reverse on the K3 make it easier to use the logging software spots?
73 Bill AE6JV On 4/2/19 at 4:11 PM, anyone1...@gmail.com (Gmail) wrote: > I recommend reading the FLDIGI manual. It states that USB is used for > digital modes, including RTTY. The K3 uses USB for Data A and LSB for Data > AFSK. > In my first contest I was having problems getting reliable decoding and not > many responses to my calls. I asked a friend who is an PVRC RTTY expert for > help. He monitored my transmission and determined my signal was reversed. He > said some operators would see that and change mode to answer me. Enabling Rv > (reverse) on the lower FLDIGI control panel solved problem. However my > logging software sends a mode command to radio when I select a spot and > change frequency and it turns off Rv. A better solution is Data A mode which > uses USB. > There may be a way to change the FLDIGI RTTY default however I have not > found it in the menus. Has anyone found it? > Ray > W8LYJ --------------------------------------------------------------------------- Bill Frantz | If you want total security, go to prison. There you're 408-356-8506 | fed, clothed, given medical care and so on. The only www.pwpconsult.com | thing lacking is freedom. - Dwight D. Eisenhower ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html