When FLDIGI rig control is “XML-RPC” the mode select drop down box under frequency is disabled. In that rig control mode Data A which is USB needs to be use. I did not realize until I just checked FLDIGI that it is only disabled in that rig control mode. Ray
Sent from my iPad > On Apr 5, 2019, at 16:59, Don Wilhelm <donw...@embarqmail.com> wrote: > > Ray and all, > > The K3/K3S/KX3/KX2 has a DATA submode AFSK A which is LSB (unless you change > it) and also has special filters for RTTY - you have to set the mark > frequency in the menu to match your software (or the other way around). > Using the DATA submodes rather than SSB automatically sets the compression to > zero and the TX and RX EQ to flat. That allows you to switch to DATA modes > without disturbing whatever compression and EQ settings you have set for SSB. > > Read the Elecraft manuals for more information. > > So if you set the K3 to AFSK A, you are placing the K3 in USB mode and > complying with the FLDIGI instructions that you read. > > FLDIGI instructions do not consider the features available on the K3 because > they are written for the lowest common denominator and apply to transceivers > that do not have specific DATA modes. > > As a side note, for non-RTTY soundcard data modes, use K3 DATA submode DATA A > rather than SSB USB. > > 73, > Don W3FPR > >> On 4/5/2019 4:31 PM, Raymond wrote: >> That option is not available or I would. The drop down box is blank. The >> instructions I read say use RTTY and have the radio in LSB. >> Ray >> Sent from my iPhone >>> On Apr 5, 2019, at 3:17 PM, Christopher Hoover <c...@murgatroid.com> wrote: >>> >>> Use PKTUSB with fldigi digital modes. This is covered in the fldigi docs. >>> >>> 73 de AI6KG ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html