I use AUDACITY which is a free software, record my own messages, set it to  play a loop and let it feed the radio.  It can be used for most all modes, SSB and CW.     I have several pre-recorded messages which I can easily choose.   All that is needed is the free software, and a single USB cable between the computer and my K3S. Set the input to MIC + LIN and turn on the VOX.  A few level tweaks and one is off and running.

73

Bob, K4TAX


On 4/30/2019 9:17 AM, Dick Dievendorff wrote:
Bill: I use mine in DX pileups, as I tend to get enthusiastic and holler my 
call, which could become tedious to my wife. M1 has my call, M2 has “thanks, 
you’re also 59”.  CW memories for M1 and M2 have similar function.

I tend to use M1 less often and M2 sooner since the arrival of my KPA1500.

Good to meet you in Visalia!

73 de Dick, K6KR

On Apr 30, 2019, at 13:58, K8TE <billama...@gmail.com> wrote:

In addition to contesting, I use it to call friends for a pre-setup sked.
They often don't show-up on-time or can't make it.  I quit after five
minutes with no response.

During FD several years ago, I took over the 40m station after a nearby
lightning strike took out the primary K3.  The back-up had no DVR.  That was
the longest four hours of the event (not a contest)!

I have also used the DVR for Special Event Station operations when the rates
slow down.  I wouldn't be without a DVR in my K3's!


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to