Paul,
You are telling the KX3 to use the 50 MHz output (on the BNC connector)
and not the 144 MHz output from the 2 meter option.
Change the XV2 IF parameter to 144.
The XV2 ADR parameter gives the band decode that will be sent when that
transverter is selected, and can be used to activate your 1296
transverter if you decode the band data correctly.
73,
Don W3FPR
On 5/9/2019 10:13 AM, Paul Gacek via Elecraft wrote:
I have had the KX3/2m and SG Labs successfully working by simply selecting the
KX3 2m band (i.e the KX3 VFO displays 144.200Mhz etc) and driving the SGLabs
box with 144Mhz signals.
…and if interested in prior UK adventure with my KX3/SGLabs box check out
https://w6png.wordpress.com/2018/10/14/black-is-black
<https://w6png.wordpress.com/2018/10/14/black-is-black>
As a SOTA guy mental arithmetic on a peak can be faulty and so I would prefer
to configure one of the spare XVn (2-9) for 1296Mhz display/operation.
I have left the 2m XV1 parameters untouched and set the XV2 parameters as
follows;
XV2 (on) = Yes
XV2 (RF) = 1296
XV2 (IF) = 50
XV2 (Pwr) = 3.0
XV2 (OFS) = 0
XV2 (Adr) = trn1
Unfortunately I am not driving the SG-Lab transverter with these XV2 settings
and the band set to XV2 (i.e the one between 144 and 1.8Mhz
What have I misconfigured?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
