Thanks but 144 does not show up as an option when I select XV2 IF. Options are 7,14,28 and 50.
Do I need to enable something else to get 144 as an option? Paul > On May 9, 2019, at 7:44 PM, Don Wilhelm <donw...@embarqmail.com> wrote: > > Paul, > > You are telling the KX3 to use the 50 MHz output (on the BNC connector) and > not the 144 MHz output from the 2 meter option. > Change the XV2 IF parameter to 144. > > The XV2 ADR parameter gives the band decode that will be sent when that > transverter is selected, and can be used to activate your 1296 transverter if > you decode the band data correctly. > > 73, > Don W3FPR > >> On 5/9/2019 10:13 AM, Paul Gacek via Elecraft wrote: >> I have had the KX3/2m and SG Labs successfully working by simply selecting >> the KX3 2m band (i.e the KX3 VFO displays 144.200Mhz etc) and driving the >> SGLabs box with 144Mhz signals. >> …and if interested in prior UK adventure with my KX3/SGLabs box check out >> https://w6png.wordpress.com/2018/10/14/black-is-black >> <https://w6png.wordpress.com/2018/10/14/black-is-black> >> As a SOTA guy mental arithmetic on a peak can be faulty and so I would >> prefer to configure one of the spare XVn (2-9) for 1296Mhz display/operation. >> I have left the 2m XV1 parameters untouched and set the XV2 parameters as >> follows; >> XV2 (on) = Yes >> XV2 (RF) = 1296 >> XV2 (IF) = 50 >> XV2 (Pwr) = 3.0 >> XV2 (OFS) = 0 >> XV2 (Adr) = trn1 >> Unfortunately I am not driving the SG-Lab transverter with these XV2 >> settings and the band set to XV2 (i.e the one between 144 and 1.8Mhz >> What have I misconfigured? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html