Bob,
An alternative solution is to set VFO CRS to what you want (it is per
mode). Also set VFO OFS to ON.
Now you can use the RIT/XIT knob for coarse excursions across the band
while leaving VFO A set to FINE. Of course, if you turn RIT/XIT on, you
will lose that capability until you turn it off.
73,
Don W3FPR
On 10/17/2019 9:48 AM, Bob Novas via Elecraft wrote:
Bill - hunh. I didn’t think of testing it that way, but clearly that works and
tells the tale. Kind of off-putting, knowing that you’re really up to 99 Hz
away from where you think you are when you select Coarse. Maybe a good use for
a macro.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com