What I have now is the K9AY as the main antenna on the 1026, and the random-length vertical with two radials as the second "Aux" antenna. The adjustment is extremely finicky. The phase control has a hair trigger basically. Plus I can't really equalize the signals since the vertical aux antenna can't hear as well as the K9AY.
I'm trying to figure out how I could use the combination of my TX antennas (which run through the antenna switch) versus the K9AY, and use the AUX antenna strictly for diversity RX on the K3s, which works somewhat brilliantly on 40m, but doesn't do much on 80/160. - pjd -----Original Message----- From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> On Behalf Of Dick Dickinson Sent: Tuesday, November 26, 2019 9:38 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] NCC-2 noise canceller with K3s? Have you tried the current antenna setup with the 1026..? Did it perform at all? If not, what were the perceived shortcomings? My guess is that with what you have and no changes other than the noise canceling unit, you'll get about what you are now getting, only more so with the NCC-2. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
