"Does "100% - 10 min, 100 W key-down" mean that if you key down without stop in CW mode it can go 10 minutes at 100 watts? That seems like an awful lot."
If you want to know what it actually means you'd probably have to run a test and record the PA temperature. Does it reach maximum value within that 10 minute period? If so, what is that maximum value and do you want to operate the finals at that temperature? If temperature does not reach a maximum then what is the rate of increase? At what time does the increasing temperature cross over the temperature at which you are willing to operate the finals? I record KPA500 temperatures for every transmission. Unfortunately Kenwood does not provide finals temperature on the serial bus so I have to make do with recording my TS-590S rear chassis temperature. Kenwood provided data shows TS-590S final temperature limited at about 85 deg C after 5 minutes and remained constant for remainder of the 2 hour 100 W key down test. (and no, I don't let mine get that hot) 73, Andy, k3wyc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
