The PR-781 does not like the DC bias supplies from many newer ham radios. A capacitor in series with one side of the balanced line. Heil offers a specialized cable for three pin XLR mike to the mike jack on front of different brands of transceivers. Contains the capacitor as required. Works for me.
Gil W7GIL > All: > > I have a follow-up question regarding balanced mics and unbalanced > connections. I'm about to connect a balanced dynamic microphone (Heil > PR-781) to the rear mic input on my K3S which has a 1/8" unbalanced mono > connection. > > One recommendation was to connect XLR pin #2 mic (+) to the tip of the > 1/8" jack and pin #3 mic (-) to the sleeve. In this case, pin #1 or > ground is left floating with no connection. A 1/8" mono jack was > recommended for this setup. > > The other recommendation was to connect pin #2 to the tip and pin #1 and > #3 to the sleeve of the 1/8" jack. It was also suggested that I can use > either a 1/8" mono or a stereo TRS jack in both cases. > > So which is correct? > > Tony -K2MO > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to g...@seanet.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com