Hi Mike, Yes, the Phase Lock option is installed according to instructions from Elecraft. But, I am 800 Hz off.
73. John WA1EAZ > On Aug 11, 2020, at 10:51 AM, Mike Harris <mike.har...@horizon.co.fk> wrote: > > Hi John, > > Can we assume that the K144XV Oscillator Phase Lock (option) is installed. It > works for me. > > Regards, > > Mike VP8NO > > On 11/08/2020 09:20, John Stengrevics wrote: >> I am using an external reference to lock the K3S' frequency. The resulting >> frequency is 100% accurate on the low bands and on 6 meters. However, on 2 >> meters, the frequency is approximately 800 Hz low. >> The manual states that using an external reference will lock the frequency >> but that it will be somewhat less accurate (not 800 Hz less accurate). >> There is no procedure given for calibration with an external reference >> oscillator. >> I suppose I could play with the offset, but that seems hit or miss. I would >> appreciate any suggestions. >> 73, >> John >> WA1EAZ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
