Ben,

The K144XV & Phase lock calibration steps have already been performed.  The 
problem arises when using an external reference oscillator.  

Elecraft support emailed.

Thanks,

John
WA1EAZ

> On Aug 11, 2020, at 7:14 PM, w4sc <w...@windstream.net> wrote:
> 
> Read the following: 
>  
> K144XV manual pp20
> K144XV Reference Oscillator Phase Lock Option Manual. Pp 11
>  
> Once the K3S 49MHz oscillator is calibrated, leave alone.
>  
> The LOs (plural,,,116MHz and 118MHz) are locked to the 10MHz reference 
> (which, depending where you are in the 2M band).  If there is no 10MHz 
> reference applied, keeping the desired accuracy may be impossible over a 
> range of temperature.
>  
> You should be able to attain +- 10Hx accuracy according to the K144XV 
> manuals.  If the 800Hz error cannot be corrected by the procedure outlined, I 
> suggest contact Elecraft support.
>  
> Ben W4SC
>  
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to