Page 13 of the KAT500 owners manual describes an AH-4 connection between Icom radios and the KAT500.
Does this work for you? 73 de Dick, K6KR > On Sep 12, 2020, at 14:06, Russell Domareck via Elecraft > <elecraft@mailman.qth.net> wrote: > > I own a KAT500 and KPA500 that I use with an IC 7300. When in CW mode, the > KAT500 can be activated by keying the IC 7300, no problem. This allows the > KAT500 to find a match with low power while the KPA500 is in standby mode. > In SSB mode, there is still the need to activate the KAT500 for the match, > however, neither keying the mike nor speaking into the mike activates the > KAT500. A press of the transmit button in the IC 7300 also did not activate > the KAT500. I find that I have to first switch to CW mode for the activation > before switching to SSB so that the KAT500 is all set for KPA500 operation. > Is what I am doing the only way to do this? I have read related posts on > this subject but they did not satisfactorily answer my question. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to d...@elecraft.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
