Use the KPA1500 Utility program. In the PF box for PF1 just put ^XI0; In the PF2 box put ^XI3;
No need to put PF1 and PF2 in front. Dave wo2x -----Original Message----- From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> On Behalf Of Howard Sherer Sent: Saturday, October 24, 2020 3:13 PM To: elecraft <elecraft@mailman.qth.net> Subject: [Elecraft] help with writing a macro for the KPA 1500 I am trying to write macros for the PF 1 & 2 keys for the KPA 1500. My objective is: Have the PF1 button switch the Input to the K3s with the command ^PF1^XI0; Have the PF2 button change the input type to serial (for Flex) with the command ^PF2^XI3; Neither one is working, where am I going wrong? I assume that after I have these working with the command tested in the 1500 util, that saving them will send them to program the buttons on the 1500? Is this correct? Howard ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to rocke...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
