Am 24.04.2021 um 09:52 schrieb Christian Janssen DL1MGB:
> Hi Gernit,
>
> maybe I was a bit unclear. The RIT didn't work before I changed the encoder.
> And it still doesn't work after I replaced the encoder by a brand new one
> directly shipped from Elecraft.
>
> 73s Chris DL1MGB
>
>
>
> Am 24.04.2021 um 09:39 schrieb G:
>> Hi Chris
>> I had the same issue with the filter shift pot. I mailed elecraft support
>> and they sent me a replacement part. Takes some effort to replace it but it
>> is doable.
>> 73 Gernit DF5RF
>>
>> --
>> Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.
>> Am 24.04.21, 07:38 schrieb Christian Janssen DL1MGB <ch...@dl1mgb.com>:
>>
>> Hello,
>>
>> after doing some refurbishing (changing rotten connectors, cleaning,...)
>> I was curious if changing the RIT encoder will make the RIT work again. But
>> it doesn't.
>>
>> K3 #1532
>> Firmware 5.67
>>
>> I can press on the RIT and XIT button and it shows RIT and XIT in the
>> display, the green LED below the CLR goes on. But when I turn the RIT knob,
>> it stays at 0.00 and the frequency also doesn't change (also audibly). Also
>> when both RIT and XIT are OFF and CONFIG:VFO CRS is ON, then no coarse with
>> the RIT knob.
>>
>> Is there any hidden setting I missed? Or died just this RIT/XIT function
>> on the board? I also couldn't see any broken lines or parts around the RIT
>> encoder on the PCB.
>>
>> I am curious if there is easy help oout there.
>>
>> 73s Chris DL1MGB
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> <http://mailman.qth.net/mailman/listinfo/elecraft>
>> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net <http://www.qsl.net>
>> Please help support this email list: http://www.qsl.net/donate.html
>> <http://www.qsl.net/donate.html>
>> Message delivered to g...@gmx.net
>>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
