Hi Chris, Check if R78 and R79 are still OK. If the encoder does not get voltage(s) via these resistors if will never work. 73 Henk PA0C
-----Oorspronkelijk bericht----- Van: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> Namens Christian Janssen DL1MGB Verzonden: zaterdag 24 april 2021 09:53 Aan: elecraft@mailman.qth.net Onderwerp: Re: [Elecraft] K3 RIT not working Am 24.04.2021 um 09:52 schrieb Christian Janssen DL1MGB: > Hi Gernit, > > maybe I was a bit unclear. The RIT didn't work before I changed the encoder. And it still doesn't work after I replaced the encoder by a brand new one directly shipped from Elecraft. > > 73s Chris DL1MGB > > > > Am 24.04.2021 um 09:39 schrieb G: >> Hi Chris >> I had the same issue with the filter shift pot. I mailed elecraft support and they sent me a replacement part. Takes some effort to replace it but it is doable. >> 73 Gernit DF5RF >> >> -- >> Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet. >> Am 24.04.21, 07:38 schrieb Christian Janssen DL1MGB <ch...@dl1mgb.com>: >> >> Hello, >> >> after doing some refurbishing (changing rotten connectors, cleaning,...) I was curious if changing the RIT encoder will make the RIT work again. But it doesn't. >> >> K3 #1532 >> Firmware 5.67 >> >> I can press on the RIT and XIT button and it shows RIT and XIT in the display, the green LED below the CLR goes on. But when I turn the RIT knob, it stays at 0.00 and the frequency also doesn't change (also audibly). Also when both RIT and XIT are OFF and CONFIG:VFO CRS is ON, then no coarse with the RIT knob. >> >> Is there any hidden setting I missed? Or died just this RIT/XIT function on the board? I also couldn't see any broken lines or parts around the RIT encoder on the PCB. >> >> I am curious if there is easy help oout there. >> >> 73s Chris DL1MGB >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft <http://mailman.qth.net/mailman/listinfo/elecraft> >> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm> >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net <http://www.qsl.net> >> Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html> >> Message delivered to g...@gmx.net >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to h...@kpnplanet.nl ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com