At Field Day this year, the K3 TX light started flashing when we loaded
N1MM to use RTS=PTT to send .wav files. This only occurs when RTS=PTT is
set on the rig. I thought it was a bug in N1MM but it also does this when
using N3FLP's logger and the flashing corresponds to the polling rate
(which N3FJP allows one to set).
Check whether RTS is active when you powered up the K3. Yaesu radios
have a similar safety feature (cannot transmit if key is engaged during
powerup, it avoids the radio immediately transmitting when the
microphone is jammed under some electronics project or the cat sleeps on
top of the morse key.
Geert Jan
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
