Through off-reflector correspondence, it appears Bob has a point. On my
K-3 (un-updated), I have a Mini-circuits splitter between the RX Out and
RX In jacks, feeding an Airspy HF+ to support the N1MM spectrum display
window. Using an XG-3, I see about a 3 S-unit drop in signal level when
routing through the splitter, instead of the 3-4 dB I'd expect. I've
tried another splitter, with identical results, so I have no idea what's
going on.
73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at <http://beta.reversebeacon.net>.
For spots, please use your favorite
"retail" DX cluster.
On 12/4/2021 3:41 PM, Bob KD7YZ wrote:
Hello Elecraft List
I recently got my K3 back from Elecraft. They'd upgraded it to K3s.
I used to be able to run a cable from the Rx in out area on the
right-upper-rear as I face it.
That gave me antenna without the threat of RF into my SDRPlay.
I tried Rx In and Out then pressing RX on teh front, but the S-Meter drops 5
S-Units.
Yeah, signal does go to thje SDR device, but at a huge loss to the regular
operations.
What am I not seeing here ?
--
73,
KD7YZ Bob EM88LL
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to pete.n...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
