To use the RxAnt In/Out BNC connectors in the KXV3, you need to select the RX Ant from the front panel RX Ant switch. This means you need a jumper between RX Ant Out and RX Ant In to feed the RX in the K3, with a tee or splitter to feed signal to the SDR. If you do not select RX Ant, the only signal that appears at the RX Ant Out connector is due to imperfect isolation in the RX Ant relay.
73, Rich VE3KI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com