You can set TUN PWR in the K3 Config Menu to something other than 5 watts.
73,
Drew
AF2Z
On 12/07/21 06:59, Tom Boucher wrote:
Thanks NK7Z, NK7I and K8CN for responses.
Dave and Rick indicated that running the K3 at a higher power level during
the ATU Tune sequence might solve the problem however, as far as I can see,
the power level is fixed at 5 watts during auto tune and cannot be altered.
Mike, there is no problem with the Ant 1 and Ant 2 ports and manual
selection of L & C works OK. The ATU just won't end up with the right
settings for lowest SWR. The problem has not always existed.
73,
Tom G3OLB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to pu...@af2z.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
