Of course a K3 can generate bad FT8 signals if you drive the audio hard enough, but I guarantee that it can be easily done with a TS-590S as well. You just didn't do it right.
Dave AB7E On 7/8/2023 7:22 AM, Andy Durbin wrote:
Just a few comments on dirty signals and the rigs that can, if badly adjusted, produce them. I've been using a Kenwood TS-590S for about 10 years. I was asked to give a couple of digital modes presentations to the local club . I was seeing so many foul JT65, and now FT8 signals, that I wanted to use my TS-590S to produce bad signal examples and show the operator errors that caused them. I tried everything I knew and could not make my TS-590 produce anything but a clean signal. I had to resort to my library of screen captures of other station's signals for my presentation. On the other hand, one of the worst FT8 signals I ever saw was transmitted by a very experienced local operator using a K3. He fixed the problem as soon as he saw my screen shots. Just because someone told you the K3 is the best rig ever made does not mean it can't produce some really nasty signals! Andy, k3wyc
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com