I've noticed some strange behavior with my K3 lately. Sometimes the display will flash twice very quickly and beep twice. I had to take a video with my phone to see what it says because it happens quickly. The upper part of the LCD says "thr 4", and the lower part says "OFF" when this happens. This seems to be triggered when I do one of these three things: Change band with the BAND button Change band via CAT command Press, then release the REV button.
It doesn't seem to hurt anything, but it's sure annoying. The only thing i can find in the menus remotely close to this is the AGC Onset point, (which IS set to 4 on my rig), but that display in the menu shows 004 on top and AGC THR on the bottom. Any ideas what causes this? The radio SN is in the low 8000s. 73 de W0ZF ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
