Great! Thanks. Sent from Nine<http://www.9folders.com/> ________________________________ From: Andy Durbin <a.dur...@msn.com> Sent: Sunday, December 10, 2023 1:58 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KAT500 Sleep current?
"Anyone interested in the current draw for Sleep and Off (but powered) states could simply put a multimeter in the PSU lead. I would expect a difference in current between Off and Sleep that would depend strongly on the number of tuning relays that were active while sleeping. No relays are active when Off." Measured with uncalibrated meter: Off - 56.4 mA On Byp mode - 72.8 mA On Man mode, AN1, SIDEA, all C and all L relays active - 0.72 A On Man mode, AN3, SIDEA, all C and all L relays active - 0.79 A SWR LED will add even more current if lit. Sleep not measured as I never use the mode. Andy, k3wyc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w...@w2hx.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com