Werner,
While there is nothing wrong with testing it in the EC2, that throws two
or mare variables into the equation - the KIO2 and the cables.
I recommend that you first do the setup and testing with the KPA100
laying upside down on the right side of the K2 with the normal
connections. There will be no need to change any settings when
migrating to the EC2 enclosure.
73,
Don W3FPR
Werner Furlan wrote:
hello all,
I am currently building the KPA100 and I plan to put it into the EC2
where already the KAT100 resides. I am on page 24 of the manual now,
where I should test the KPA100 board and attach it to the K2.
Now my question: is it also possible to attach it to the KAT100 where it
would be when finished to do the tests?
I'd connect the K2 to the KAT100 and the KPA100 board to the KAT100.
Is this reasonable or should I open the K2 for the test?
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com