Yes, I've got 1.49. The new NR is terrific. I only mentioned the SUB receiver situation since in my case it WAS the problem and it only occured on the initial firmware that came with the radio.
73, Doug -------------- Original message -------------- From: "Eric Swartz - WA6HHQ, Elecraft" <[EMAIL PROTECTED]> > This issue was fixed many firmware revisions ago. :-) > > Doug - Make sure you are using the latest release. > > 73, Eric > ---- > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] > > Sent: Tuesday, December 18, 2007 11:55 AM > > To: David Yarnes; Elecraft Reflector > > Subject: Re: [Elecraft] K3 Mystery Problem > > > > I had this problem with #23, when I initially powered it on you > > couldn't power it off with the power switch. The cause turned\out to be > > that I had turned the sub receiver AF and RF gain controls full > > clockwise and through some quirk in the firmware, since there was > > no SUB receiver, the power off function was inhibited. The solution > > was to turn those controls full CCW. Wayne was the one who spent > > a lot of time with me solving the problem. > > > > So you might want to check that, I haven't tested to see if the problem > > recurs in mine if I move the controls off CCW. > > > > Ah, brings me back to my software/firmware development days. > > There are NO bugs, only "features" > > > > Doug > > W6JD > > > > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
