Julius Fazekas n2wn wrote:
> 
> I've had a number of things crop up since trying to get on RTTY. There may
> be no link to trying to get the rig going on FSK, and the issues are noted
> in CW mode (my primary activity).
> 
> There have been several one-time error messages. The most recent one
> being: E 0444A7 ERR DSE. 
> 
> I've received overtemp warnings on 160, even though I had not been
> transmitting on the first key down. I've checked the PS, one that I've
> been using for years. It is metered and the output voltage does not waver.
> I've checked it with a Fluke in Rx and Tx, and it reads 13.4VDC/13.3VDC
> respectively. The K3 internal meter reads 13.3 and 12.2! That doesn't seem
> right.
> 
> Also, I seem to have lost control of my RF Gain pot. It does not function
> in AGC, either F or S. Sometimes I can get it to work in AGC-OFF, cycling
> the radio on and of seems to place it back in the non-functioning mode as
> does changing bands. I've put all of the AGC settings back to factory
> default. Same problem.
> 
> I'm using the last official firmware release 2.78 and whatever the
> associated DSP firmware was. 
> 
> It might be something blatantly obvious, but I'm missing it. Any
> suggestions before I go batty?
> 
> Thanks,
> Julius
> 
> Wanted to put the second Rx in, but with this weirdness, I'm holding off.
> 
Have you tried a complete reload, either of the same firmware or the
previous version you were using?

-----
Julian, G4ILO. K2 #392  K3 #222.
http://www.g4ilo.com/ G4ILO's Shack   http://www.ham-directory.com/ Ham
Directory    http://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3 
-- 
View this message in context: 
http://n2.nabble.com/K3-problems-tp2253876p2254121.html
Sent from the Elecraft mailing list archive at Nabble.com.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to