Hi Julian, I've tried that once...
Is there a "reset to factory default" option? I don't suspect it's the firmware load, but it's worth trying again. Cheers, Julius Julian, G4ILO wrote: > > > Julius Fazekas n2wn wrote: >> >> I've had a number of things crop up since trying to get on RTTY. There >> may be no link to trying to get the rig going on FSK, and the issues are >> noted in CW mode (my primary activity). >> >> There have been several one-time error messages. The most recent one >> being: E 0444A7 ERR DSE. >> >> I've received overtemp warnings on 160, even though I had not been >> transmitting on the first key down. I've checked the PS, one that I've >> been using for years. It is metered and the output voltage does not >> waver. I've checked it with a Fluke in Rx and Tx, and it reads >> 13.4VDC/13.3VDC respectively. The K3 internal meter reads 13.3 and 12.2! >> That doesn't seem right. >> >> Also, I seem to have lost control of my RF Gain pot. It does not function >> in AGC, either F or S. Sometimes I can get it to work in AGC-OFF, cycling >> the radio on and of seems to place it back in the non-functioning mode as >> does changing bands. I've put all of the AGC settings back to factory >> default. Same problem. >> >> I'm using the last official firmware release 2.78 and whatever the >> associated DSP firmware was. >> >> It might be something blatantly obvious, but I'm missing it. Any >> suggestions before I go batty? >> >> Thanks, >> Julius >> >> Wanted to put the second Rx in, but with this weirdness, I'm holding off. >> > Have you tried a complete reload, either of the same firmware or the > previous version you were using? > -- View this message in context: http://n2.nabble.com/K3-problems-tp2253876p2254428.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html