Mine works fine too with different settings using a straight thru cable to the RS232 port on an old HP. Rig = Elecraft Comm port = 1 Baud Rate = 4.8k 8 data bits 1 stop bits Connection Power = RTS Polling rate = 2 sec Mode by: Rig
73, Bill NZ0T W3CP wrote: > > I hope an ACLog user out there can give me a clue as to my trouble. > ....................................................... > > My set up works fine, but I am using the KUSB cable that connects the K3 > to the USB port on my XP PC. Here are my AC Log settings in the Settings, > Rig Interface menu: > Rig = Elecraft > Comm port = 4 > Baud Rate = 4.8k > 8 data bits > 2 stop bits > Connection Power = None > Polling rate = 500 ms > Mode by: Rig > > I too recommend the N3FJP AC Log and contest logging programs as they are > excellent, fun, and inexpensive. > > Good luck. John W2XS > -- View this message in context: http://n2.nabble.com/K3-ACLog-interface-failure-tp2272334p2272943.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html