N3TU Is it possible that the TX power calibration by band was not done? Might be worth trying it again with the dummy load. The new firmware program makes it easy.
73 de Brian/K3KO hb9ari wrote: >Correction! > >There are 18.5A (instead of 20A) under 14.0V. >I omit to subtract 1.5A for some >external accessories! >Sorry! > >73, >Rudolf > >Ian Maude wrote: > > >>-.-. --.-N3TU -.-. --.- wrote: >> >> >> >>>My K3 is shutting off on high power. CW and SSB. It seems to be drawing too >>>many amps and I am checking this on an external power supply (DAIWA PS-304). >>>I get the same results when I am on the dummy load and when I am on the >>>antenna. I didn't check six meters but here is the data. What's going on? Do >>>I need to reset the whole radio? :-(( >>> >>> >>> >>> >>My guess is that your power supply has gone AWOL. Check the voltage >>from it on key-down. >> >>73 Ian >> >> >> >> >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html