Hi Monty,
I was just pointing out that the CX was the same connected to the amp or not. My K3 does put out in excess of 100 watts when ALC is turned off. I did adjust the ALC control on the amp. This had no result on the K3 output, i.e. 60 watts max ALC on, full output 100+ with ALC off. > From: mon...@mindspring.com > To: k...@arrl.net > Subject: Re: [Elecraft] ext ALC problem > Date: Thu, 28 May 2009 15:12:55 -0400 > > Howard - > > If you are not connected to the amplifier, what is controlling the external > ALC input to the K3? Has your K3 ever put out 100 watts? My amp's ALC > needed calibration before I could use it. > > Monty K2DLJ > > > > I am having a problem with the external ALC. I am trying a new amp that > > requires ALC feedback. When I set it in the config menu regardless of the > > value -2 to -8 my output is reduced to 60 watts. As I raise the drive it > > increases until about 60 watts then cuts back. In the tune position which > > I have set for 15 watts I get only 1-2 watts out. This occurs regardless > > of whether I am connected to the amplifier or not. The SWR is between > > 1.2and 1.5. I do have the mod installed. > > > > > > > > Ideas needed. > > > > > > > > Howard..K2HK > > > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
