> If one takes a look at the manual for the PW-1, it apparently > has provision for the "old stepped DC voltage" as well as for > the CI-V. Both the ACC-1 and ACC-2 connectors have a band data > signal. But maybe it doesn't work for some reason[??]
If you look at the schematic or the jack board (Jack 1 Unit - page 68) in the service manual, pin 4 of the ACC-1 and ACC-2 are connected only to the Exciter 1/Exciter 1&2 switch. In the single exciter position the two jacks are connected together, in the dual exciter position the two jacks are disconnected. Neither the "stepped voltage" nor the 8V reference on pin 1 appear to be used anywhere else in the PW-1. It would be difficult for the stepped voltage to switch bands in the PW-1 if it is not connected! The only purpose of the "stepped voltage" connection appears to be as a "feed through" when connecting another Icom accessory to ACC-2. 73, ... Joe, W4TV > -----Original Message----- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of > gdaug...@stanford.edu > Sent: Thursday, September 10, 2009 11:10 AM > To: elecraft@mailman.qth.net > Subject: Re: [Elecraft] Decoder for use with K3 and PW-1 > > > Joe wrote... > > > Unfortunately the PW-1 will only work with Icom serial > > (CI-V) data. It does not respond to the old stepped > > DC voltage like the 2-KL and 4-KL. > > If one takes a look at the manual for the PW-1, it apparently > has provision for the > "old stepped DC voltage" as well as for the CI-V. Both the > ACC-1 and ACC-2 > connectors have a band data signal. But maybe it doesn't > work for some reason[??] > > 73, > > George T Daughters, K6GT > CU in the California QSO Party (CQP) > October 3-4, 2009 > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html