Recap:KAT100 Tuner was going through the motions of tuning showing an SWR of 1.0-1 but K2 showing a high SWR. Reduced power on TX on all bands. SWR scale lights on the KAT100 not lighting during tune or TX.
I replaced D1 and D2 diodes on the KAT100, per Skip, WB4DAD's suggestion. This has the KAT100 tuning and showing lights operating as they should. I suspect a near lightning strike or power surge caused these to go bad? PART 2: The only issue I see now is that the tuner always reverts to ANT 1 on power up. If I shut down while set to ANT2, when I power up it will show 2 for a second then go to 1. Anyone had this problem? Thanks again to WB4DAD and his friend that passed this info to him. Also, I would like to thank Don, W3FPR for his help. He has helped me on several problems and gets my vote into the Elecraft Hall of Fame. I suspect he would have solved this as well if not for my post being rejected from the site. Now to put it all back together! Note: I ordered 10 of these diodes from an internet source, but being impatient I found them at FRY's. Same thing with the 40 pin firmware socket. So if anyone needs diodes or 20 pin sockets, feel free to contact me off list. "73" Damon W4HDM <http://www.w4hdm.camstreams.com/> Live Shack Feed SKCC 3729T Centurion # 164 Tribune # 73 (x3) WAS # 23 YoungBuckAward NAQCC #3633 K2 #00473 _____ View message @ http://n2.nabble.com/KAT100-error-tp3696887p3699372.html To unsubscribe from KAT100 error, click < (link removed) oLm5ldHwzNjk2ODg3fDM4MzkwNzk1> here. ----- W4HDM-DAMON-K2#473 -- View this message in context: http://n2.nabble.com/KAT100-error-tp3696887p3731272.html Sent from the [K2] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html