Eric, I am using the KUSB with my K2 and N1MM Logger. I plugged the K2's serial cable into the end of the the KUSB adapter. I am running at 4800 bps, no parity, 8 data bits and no stop bits. -- 73 -- Brian -- K1LI
On Thu, Jan 28, 2010 at 8:39 AM, Don Wilhelm <w3...@embarqmail.com> wrote: > Eric, > > You have run into a situation where the USB/serial adapter does not like > to work at lower baud rates. I know it is counter-intuitive, but it > seems to be true. Use your Keyspan adapter with the K2 because you have > found it to work. > > 73, > Don W3FPR > > Eric wrote: > > I thought I was clear but perhaps not--the KUSB does not work with the > proper cable I built as per Elecraft instructions but the Keyspan adapter > does. I am not trying to connect my K2 to my XP laptop using an RS-232 > cable. Has anyone been successful connecting a K2 using a KUSB? > > > > 73 Eric WD6DBM > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
