Thanks Joe - I edited your xml file to change the baud rate, but still no joy. (Rig not specified). Seems like there's something about my port setup it doesn't like. Maybe the USB to serial....... I'm on COM4 at 9600. The log sez: E: rigCAT_getfreq: Hexout failed E: rigCAT_init: Xcvr Freq request not answered
I'll keep playing with it. For general logging, I use an app I wrote. It incorporates RTTY and PSK (gotta get the new PSK stuff into it). Regards, Mike NF4L Joe Subich, W4TV wrote: > Mike, > > I used RigCAT for controlling the K3. I'll send you > my XML file but you will need to customize if for your > ports, etc. Configure radio control by: > Configure | Rig Control | RigCAT .... > check the Use RigCAT box, Click Open and select the > K3.XML file. My K3 is on COM4 at 38400 and I use > "toggle RTS for PTT" (set the K3's PTT-Key menu item > to RTS-Off). > > My particular version of K3.XML expects the K3 to use > DATA_A for the data modes (it's more generic for non- > RTTY data modes). > > It's rather straightforward. > > Fldigi can also be used with Logger32 and/or DXLab Suite > with gateway software by N2AMG to replace the need for > RigCAT or HAMLib. A forthcoming update of Fldigi includes > improved interoperation with other logging software and > N2AMG will have updated gateways for several loggers. > > 73, > > ... Joe, W4TV > > > > >> -----Original Message----- >> From: Mike [mailto:n...@nf4l.com] >> Sent: Tuesday, March 02, 2010 5:51 PM >> To: Joe Subich, W4TV >> Cc: elecraft@mailman.qth.net >> Subject: Re: [Elecraft] PSK-31 Help >> >> >> I looked at fldigi, and could not get rid of a "Rig not specified" >> message just above the freq display. I'm using a USB to >> serial adapter, >> which works FB with any other software. Any suggestions? >> >> 73, Mike NF4L >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
