> The boards as designed by EA3BLQ did not provide a "line out" audio > signal,
That is not correct. The EA3BLQ "Digital Interface" board (K2DI v. 3) provides a buffered/amplified signal from J5 (demodulator output before the volume control). This is the definition of a "line out" signal. While not quite the same as Tom's board (Don's design), the EA3BLQ "K2DI" board is functionally identical on receive and provides for PTT microphone switching/muting that is missing in Don's design. The K2DI board can be used on a stand alone basis if one does not need the "digital mode VOX" (e.g. "tone switching") or transformer input/output isolation provided in the K2DI-PCI daughter board. 73, ... Joe, W4TV On 6/7/2010 1:01 PM, NQ3RP wrote: > > Guy - > > The boards as designed by EA3BLQ did not provide a "line out" audio signal, > so using one of his boards would not provide the type audio you are seeking. > While Tom's (N0SS) board does provide a fixed audio, it also requires that > you make solder connections to the Control Board of your K2. If you are > comfortable with doing that, then I suggest you ask Tom for his files and > have a couple of boards made. Please contact Tom @ N0SS (at) arrl.net for > any more discussion about your needs. I'm trying to keep this discussion > only about those that are interested in the K2DI& PCI boards, thank you. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html